Mobilmet 420 Series products are high-performance multi-purpose cutting oils. They are chlorine-free, non-staining and non-corrosive. They are designed for light to moderate duty cutting operations and they are also suitable as machine tool lubricants and for use in light duty hydraulic systems. They are formulated from high quality base oils and select additives to provide effective machining performance in a wide variety of operations of both ferrous and non-ferrous metals. The oils are light-colored and transparent so that the work area can be clearly seen at all times. The Mobilmet 420s are formulated to prevent the formation of oil mist in the vicinity of the machine tool.
Mobilmet 420 Series fluids are resistant to foaming, even with excess splashing so that superior performance is provided in the machine tool lubrication system. With relatively low pour points and high viscosity indexes, they are not difficult to dispense in cold conditions and provide adequate film strength in hot-running machine tool bearings under load.
In addition to their machining performance characteristics, the Mobilmet 420 Series fluids are multi-purpose in nature which helps reduce the problems associated with cross-contamination, thus improving production and reducing rejects. They are formulated using chlorine-free additives reducing the environmental impact of disposal and spillage. The Mobilmet 420 Series fluids control built-up edge and protect the tool tip from wear. They provide improved surface finish that may eliminate the need for finish turning or forming before grinding.
Features and potential benefits of Mobilmet 420 products include:
|Features||Advantages and Potential Benefits|
|Excellent machining performance||Increased production resulting from longer tool life and reduced downtime for tool changes and wheel dressing|
|Improved surface finish and dimensional accuracy resulting in fewer rejects and better quality finished products|
|Helps increase feed rates and machine speeds|
|Suitable for a wide range of ferrous and non-ferrous metals and machining operations||Fewer cutting oils required, potential for reduced inventory costs|
|Multi-service capability||Eliminates cross-contamination problems and provides further inventory benefits|
|Light, transparent color||Provides a clear view of the work area at all times|
Mobilmet 420 Series fluids are recommended for a wide range of machining operations on all types of metals. They can be used as multi-purpose oils when a common fluid is required for machine tool lubrication and as a hydraulic fluid assuming proper viscosity selection.
|Mobilmet 420 Series||423||424||426||427|
|Viscosity, ASTM D 445|
|cSt @ 40º C||15||23||32||46|
|cSt @ 100º C||3.5||4.9||5.7||6.9|
|Pour Point, ºC, ASTM D 97||-15||-15||-15||-12|
|Flash Point, ºC, ASTM D 92||182||200||210||212|
|Specific Gravity @15º C kg/l, ASTM D 1298||0.859||0.862||0.874||0.877|
|Copper Strip Corrosion, ASTM D 130, 3 hrs @ 100º C||1B (max)||1B (max)||1B (max)||1B (max)|
Based on available information, this product is not expected to produce adverse effects on health when used for the intended application and the recommendations provided in the Material Safety Data Sheet (MSDS) are followed. MSDS's are available upon request through your sales contract office, or via the Internet. This product should not be used for purposes other than its intended use. If disposing of used product, take care to protect the environment.
The Mobil logotype, the Pegasus design, and Mobilmet are trademarks of Exxon Mobil Corporation, or one of its subsidiaries.
Copyright © 2001-2016 Exxon Mobil Corporation. All rights reserved.