The Mobil Rarus™ 800 Series is a line of supreme performance air compressor lubricants primarily intended for the lubrication of severe duty reciprocating air compressors but not recommended for air compressors used in breathing air applications. They are engineered to meet or exceed the stringent requirements of the major compressor manufacturers. They are formulated with design-specific synthetic base-oils and a high technology additive system that assures exceptional equipment protection and reliability for compressors operating under conditions where mineral-oil based products are not meeting expectations. Mobil Rarus 800 Series provides excellent wear protection and outstanding resistance to oxidation and thermal degradation, greatly superior to mineral oils. Their unique formulation provides the ability to help reduce maintenance costs through minimising equipment problems and downstream deposits and carryover.
Mobil Rarus 800 Series lubricants significantly reduce the potential for fires and explosions, compared to mineral oil-based products. They exhibit a virtual absence of deposit formation and higher autogenous ignition temperatures improving both performance and safety. Their exceptional water separating characteristics reduce problems with emulsion formation and carryover into downstream piping and equipment. They are recommended or approved by many of the leading compressor manufacturers.
The use of the Mobil Rarus 800 Series oils can result in cleaner compressors and lower deposits compared to conventional mineral oils, resulting in longer running periods between maintenance intervals. Their excellent oxidation and thermal stability safely allow extended life capability while controlling sludge and deposit formation. They possess outstanding anti-wear and corrosion protection, which enhances equipment life and performance.
|Features||Advantages and Potential Benefits|
|High Performance Synthetic Base Stocks||Significant performance capabilities relative to mineral oils
|Low Ash and Carbon Formation||Improved valve performance
Reduced deposits in discharge lines
Reduced potential for fires and explosions in discharge systems
Improved compressor performance
|Outstanding Oxidation and Thermal Stability||Longer oil life
Improved filter life
Lower maintenance costs
|High Load-carrying ability||Reduced wear of rings, cylinders, bearings and gears|
|Excellent Water Separability||Less carryover to downstream equipment
Reduced sludge formation in crankcases and discharge lines
Reduced blockage of coalescers
Less potential for emulsion formation
|Effective Rust and Corrosion Protection||Improved protection of valves and reduced wear of rings and cylinders|
The Mobil Rarus 800 Series oils are recommended for single and multistage air compressors, but are not recommended for air compressors used in breathing air applications. They are particularly effective for continuous high temperature operation with discharge temperatures up to 200ºC. They are suitable for reciprocating and rotary type machines with the lower viscosity grades mainly used in rotary compressors. Rarus 800 Series oils are recommended for units with a history of excess oil degradation, poor valve performance or deposit formation. They are compatible with all metals used in compressor construction and with mineral oil-based lubricants but admixture will detract from their performance capabilities. Mobil Rarus 800 Series oils are compatible with seals made from fluorinated hydrocarbon, silicone, fluorosilicone, polysulfide, Viton, Teflon, and high nitrile Buna N NBR (above 36% acrylonitrile) materials. Materials not recommended include low nitrile Bune N NBR (below 30% acrylonitrile), natural and butyl rubbers, Neoprene, polyacrylate, styrene/butadiene and chlorosulfonated polyethylene.
Oil resistant paints are not affected by Mobil Rarus 800 Series, but lacquer, varnish, pvc and acrylic paints are not recommended.
The following types of compressor applications have shown excellent performance with the Mobil Rarus 800 Series oils:
|Mobil Rarus 800 Series||824||827||829|
|ISO Viscosity Grade||32||100||150|
|Viscosity, ASTM D 445|
|cSt @ 40ºC||29.5||107.5||158|
|cSt @ 100ºC||5.5||10.12||13.2|
|Viscosity Index, ASTM D 2270||127||66||70|
|Total Acid Number, ASTM D 974, mgKOH/g||0.06||0.15||0.14|
|Copper Strip Corrosion, ASTM D130, 3 h @ 121ºC||1B||1B||1B|
|Rust Characteristics Proc A, ASTM D 665||Pass||Pass||Pass|
|Foam Seq I, ASTM D 892||10/0||10/0||50/0|
|Pour Point, ASTM D 97, ºC||-54||-36||-40|
|Flash Point, ºC, ASTM D 92||244||270||270|
Based on available information, this product is not expected to produce adverse effects on health when used for the intended application and the recommendations provided in the Material Safety Data Sheet (MSDS) are followed. MSDS's are available upon request through your sales contract office, or via the Internet. This product should not be used for purposes other than its intended use. If disposing of used product, take care to protect the environment.
All trademarks used herein are trademarks or registered trademarks of Exxon Mobil Corporation or one of its subsidiaries unless indicated otherwise.
Copyright © 2001-2016 Exxon Mobil Corporation. All rights reserved.