Mobilarma 798 is a premium performance, oil-based rust preventive intended to
serve as a wire rope lubricant and to prevent rust and corrosion under
application and storage conditions. It is used in industrial, mining, and
marine applications. Mobilarma 798 has excellent film forming properties and
is of grease-like consistency. Its tenacious film protects wire ropes from the
corrosive tendencies of salt spray and moisture-laden atmospheres. Mobilarma
798 is effective throughout the extremes of temperatures that may be
encountered at sea and gives good protection against mild acids. It is pliable
at -35ºC and will not drip at 60ºC. It resists throw-off in high-speed service
and adheres without being tacky or stringy. On application, Mobilarma 798
becomes transparent enabling treated ropes to be visually inspected. The film
is self-healing and does not chip.
Mobilarma 798 works well between the strands of wire rope, providing excellent lubrication during flexing. This characteristic reduces wear and improves life. It is compatible with other wire rope core impregnating materials that may have been applied during manufacture.
Mobilarma 798 works well between the strands of wire rope, providing excellent lubrication during flexing. This characteristic reduces wear and helps improve life. It is compatible with other wire rope core impregnating materials that may have been applied during manufacture. Its excellent rust and corrosion protection properties substantially reduce the negative effects of fresh water, salt water and mild acids thus improving performance and reducing maintenance costs. It is easy to apply and economical to use.
|Features||Advantages and Potential Benefits|
|Outstanding adhesive characteristics||
Forms transparent film, making rope inspection easier
|Excellent rust and corrosion protection||
Provides protection against rusting from fresh and salt water over a wide
Protects rope against attack from mild acids
|Very good lubrication properties||
Can be applied by brush or swab as received
Can be applied by spray, dip, or bath if heated
Mobilarma 798 can either be applied as received by brush or swab, or by spray,
dip, or bath if the product is first heated to 65ºC to 80°C in a well
ventilated area. For best results, only a thin coat should be applied. New
cables or cables regularly maintained with Mobilarma 798 will require no prior
preparation. For best results, rusty or dirty wire ropes should be wire
brushed and cleaned thoroughly with solvent and dried prior to application of
Mobilarma 798 is recommended for use in the:
|Viscosity, cSt @ 100ºC, ASTM D 445||23.1|
|Dropping point, ºC (min), ASTM D 2265||63|
|Flash Point, ºC, ASTM D 92||238|
|Density @15.6 ºC, calculated, lbs/gal||7.36|
Based on available information, this product is not expected to produce adverse effects on health when used for the intended application and the recommendations provided in the Material Safety Data Sheet (MSDS) are followed. MSDS's are available upon request through your sales contract office, or via the Internet. This product should not be used for purposes other than its intended use. If disposing of used product, take care to protect the environment.
The Mobil logotype, the Pegasus design, and Mobilarma are trademarks of Exxon Mobil Corporation, or one of its subsidiaries.
Copyright © 2001-2016 Exxon Mobil Corporation. All rights reserved.