Mobilux EP 2 Moly is a premium quality multi-purpose, lithium-base NLGI No 2 grease recommended for general industrial applications. It contains an extreme-pressure additive for increased load-carrying ability. Additionally, it contains molybdenum disulfide (also known as moly and MoS 2), which enhances the anti-friction properties of the grease under boundary lubrication conditions. Mobilux EP 2 Moly is dark gray and has a smooth, buttery texture. It is water resistant, has excellent oxidation and mechanical stability, and protects against corrosion.
Molybdenum disulfide offers particular advantages under boundary lubrication
conditions, especially where sliding or vibration action pushes the grease
away from the contacting surfaces. It provides a measure of protection against
fretting and is therefore recommended where this phenomenon is a problem, as
in splined shafts, pivot pins, fifth wheels, and other parts subjected to
oscillating or sliding motion. Also, where relubrication is infrequent,
molybdenum disulfide provides extended lubrication protection.
Mobilux EP 2 Moly multi-purpose grease offers the following features and benefits:
Mobilux EP 2 Moly is suitable for plain bearings and gears. It also can be used in rolling contact bearings, but is not generally recommended for high-precision rolling contact bearings because of the possibility of molybdenum disulfide building up in the clearances. Mobilux EP 2 Moly has applications in the construction, mining, and farming industries. In off-highway trucks and other vehicles, it provides excellent service in bucket pins, rack and pinion gearing, fifth wheels, steering gears, etc.
|Mobilux EP 2 Moly|
|Thickener Type||Lithium 12-OH|
|Color, Visual||Dark gray|
|Base Oil Viscosity, ASTM D 445|
|cSt @ 40°C||150|
|Texture||Smooth and Buttery|
|Penetration, ASTM D217 worked, 60x, mm/10||280|
|Dropping Point, ASTM D 2265, °C (°F)||175 (347)|
|Oil separation test, ASTM D 1742, %||3|
|Wheel bearing leakage, ASTM D 1263 104°C (220°F), g||0|
|Timken OK Load, ASTM D 2509, kg (lb )||18 (40)|
|Water Washout, ASTM D 1264 @ 79°C, %||6|
|Corrosion prevention test, ASTM D 1743||Pass|
|Molybdenum disulfide, %||3|
Based on available information, this product is not expected to produce adverse effects on health when used for the intended application and the recommendations provided in the Material Safety Data Sheet (MSDS) are followed. MSDS's are available upon request through your sales contract office, or via the Internet. This product should not be used for purposes other than its intended use. If disposing of used product, take care to protect the environment.
The Mobil logotype, the Pegasus design and Mobilux are trademarks of Exxon Mobil Corporation, or one of its subsidiaries.
Copyright © 2001-2016 Exxon Mobil Corporation. All rights reserved.